Polyvinyl Butyral PVB Interlayer Film Manufacturer

Pre-laminating room’s environment is very important for manufacturing successful laminated glass with Polyvinyl Butyral PVB interlayer film. There are some requirements：

1. Install double doors, and the double doors not open at the same time and better install wind-shower equipment in the middle of double doors.

2. The temperature inside the pre-laminating room should keep at 18-20 degrees and humidity at 20%-30%.

3. Wokers should wear antistatic suit, glove, hat.

4. Regularly clean the equipments and pre-laminating room.

http://www.polyvinylbutyralpvbfilmmanufacturer.com all rights reserved.

Clean the glass, better use the soften water to clean the oil, dust, flaw on the glass surface. Then dry the glass and put away in the laminating room.

When cutting the Polyvinyl Butyral PVB interlayer film according to the glass, make sure the Polyvinyl Butyral PVB interlayer film not have 2mm extra larger than the glass, or the two much Polyvinyl Butyral PVB interlayer film will sealed the pre-laminated glass before all the Polyvinyl Butyral PVB interlayer film is totally melted.

http://www.polyvinylbutyralpvbfilmmanufacturer.com all rights reserved.